Field Marshal FM-II DI Tech Specs

 

Engine Model Number : FM-II DI

Power : 8/5.9

No Of Cylinders :1

Bore :114.3

Stroke : 139.7

Speed :1000 RPM

Specific Fuel Consumption :240/177

Compression Ratio :16:1

Displacement :1432

Fuel :HSD [ High Speed Diesel ]

Lubrication :SAE 30/40

Bare Weight Of Engine  [ Approx ] : 335 Kg

Gross Weight Of Engine [ Approx ] : 470 Kg

Packed Case Size : 1070 x 700 x 1145

Packing Case Volume : 0.86

Fuel Tank Capacity : 8.5 Liters

 

General Lister Engine Details

 

Verticle Diesel Engine Is Rated On The Effective Horse Powerat Engine Crankshaft As a Maximum LoadFor Continuous Running .Each engine Is Tested As Per IS:10001-1981 To Give Continuous Rating

 

Cooling 

Engine Cooling Is Effectively Handled By a Run Through Power Supply .A Radiator Or a Cooling Tank Could Also Be Provided If Required.

 

Lubrication 

All Internal Parts Are Lubricated By Splash system .In Case Of Bush Bearing Type 8 HP B/W ,10 HP And Above Lubrication Is By Plunger Type Lubracating Pump Which Is Mounted Below Fuel Pump Bracket And Provided Lubricating Oil To Taper Roller Bearings & Connecting Rod Big End BearingThrough Banjo Oil Mounted On Crankshaft,Parts Like Values,Push RodsEtc Could Be Lubricated By With Oil Can

 

Rotation

Standard Rotation Is Clockwise,Facing Flywheel Keeping Exhaust On The Left Hand Side .

 

Fuel Injection Equipment

MICO (Bosch) Or USHA Fuel Injection Equipment Or Compatiable Is Used .

 

Governing

A Sensitive Centrifugal Type Governer Is Mounted On The Camshaft Gear Wheel ,Speed Variation is Controlled Within Limit To Comply With B1Class Governing As Mentioned In IS 10000 [ Part 7 ]  1980

 

Cylinder Liner

The cylinder Liner Is Hard Chrome Plated and Has Very Long Life .

 

Air Cleaner

Oild Bath Type Air Cleaner Is Provided To Clean Air .Use Of Clean Air Increases the Life Of The Cylinder Liner

 

Standard Equipments Supplied

Pulley ,Spanner Set ,Screw Driver ,Oiler ,Starting Handle ,Air Cleaner ,Silencer,Fuel Tank ,Tool Bag ,Instruction Manual ,And Hose Nipple

 

IMPORTANT NOTES

To Get Effective Engine Performance ,The Temperature Of The Cooling WaterComing Out From The Engine HEad Should Be Between 50 Degree Celcius And 70 Degree Celcius .